6-40W LED Light CNC Industrial Work Lamp for Milling Router Lathe Sewing Machine. Adopting high brightness LED chip and high quality drive, low light failure, no frequency flash, and large margin. The lifetime reach to 5000 hours. Integrated design, adopting aluminum alloy and high strength tempered glass, and with good heat dissipation. Fine workmanship, the surface anodic oxidation treatment does not discoloration. 5.360 degree rotating bracket design can be rotated to change the Angle of irradiation. IP67 protection class and can be used in waterproof, dustproof and explosion-proof occasions, safe and easy to replace. Product type: LED waterproof oil proof and dustproof lamp. Material: High quality aluminum and tempered glass. Light voltage: 24V-36V, 110V-220V. Product power: 6W/10W/12W/16W/20W/28W/30W/40W (according to your choice). Protection class: IP67 (Waterproof, oilproof and dustproof). Surface temperature: Less than 50 Celsius degrees. Light angel: 120 degree. Wire length: about 70 cm. Install type: Screw mounting. Length: according to your choice. Different sizes may suitable for different mechanical occasions. 1 x CNC Machine Industrial LED Work Light. International Buyers – Please Note: a. Misused or abused merchandise will not be accounted as defective. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback.

1 x MMP25 3D Light Edge Finder. Product Name: 3D Edge Finder. Item model number: MMP25. Repeat positioning accuracy:? 0.001. Probe direction: ±X ±Y +Z. Probe safety stroke: X. Y plane ±15°, Z direction +5mm. Trigger life:? 5million times. Power supply: 14250 lithium battery 3.6V. Measurable insulating material: Metal, bakelite, wooden board, plastic, etc. Communication is the best way to solve the problem. Your satisfaction is our top priority. We have always been committed to providing the best service and reliable products to every customer. However, accidents may occur at times, and we understand your concerns and setbacks. We will reply to you as soon as possible. Our goal is to provide first-class customer service, so we usually do our best to solve any problems! Please Note: Communication is the best way to solve the problem.

Good Material: the lathe tool holder is made in mental and not easy to wear, very firm and durable. Usage Characteristics: They have broad utility which are easy to install and operate. 3.100% brand new and high quality. Length: 215mm (8.5). Width: 65mm (2.56). Center height: 67mm (2.6). Travel: 80mm (3.15). Slot height: 22mm (0.87). Handwheel length: 100mm (3.9). Installation hole spacing: 106mm (4.17). Key width: 12mm (0.47). Base width: 106mm (4.17). Total weight: 4.89KG. Width: 80mm (3.14). Center height: 74mm (2.9). Travel: 70mm (2.76). Handwheel length: 122mm (4.8). Disc diameter: 89mm (3.5). Hole spacing: 110mm (4.3). Small aperture: 11mm (0.43). Center height: 76mm (3). Slot height: 16mm (0.87). Handwheel length: 82mm (3.2). Base width: 104mm (4). Length: 235mm (9.25). Width: 67mm (2.6). Center height: 102mm (4). Maximum clamping: 70mm (2.7). Left and right rotation: 60 °. Base width: 111mm (4.4). Installation hole spacing: 114mm (4.5). Positioning key width: 12mm (0.47). Total weight: 6.85KG. 1 Lathe Tool Holder (Depending on your choice). There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It’s cheaper but it ain’t free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS……… Emco_Hobby_Shoppe Listing Banner Revised 03/15/2023. The first chuck has a full set of EC collets. Good or better condition. Some spots of discoloration. Some rust on lever. Some tool marks from use. No bracket for lever. Dirty; needs a cleaning. Xidation and oil stains as can be expected from age. Will be professionally packed. Listing Data Verified By: Chuck N. I DON’T HAVE IT IN STOCK. It’s kind of sad really, because I happened to know they were good people with a good product. Blocking can be the result of any or all of the following. Low ball offers especially on items without “Make an Offer” – These are offensive. This suggestion should not cause anyone to go off the rails! In the past when I’ve reversed a block, 100% of the time a repeat offense occurs. It’s just in the nature of these buyers. But, not the way I choose to do business. I can’t really account for this but it can be frustrating not knowing where a package is. Some would call it trash but there are no food products in the box. This re-use is good for our land fills in Michigan. I will provide the pallet and band the item to it. A Liftgate is required. Emco Unimat DB200 SL1000 Emco Unimat 3 Emco Compact 5 (or Sears Craftsman) Emco Compact 5 Unimill Emco Compact 8 (or Sears Craftsman) Emco Compact 10 Emco Maximat 7 (or Emcomat or Mentor) Emco Maximat V8 Emco Maximat V10 (or Emcomat or Mentor) Emco Maximat V10-P Emco Maximat Super 11 Emco Maximat Super 11CD Emco VMC-100 Emco Maximat FB-2 Emco Maximat Miller…………………….. The best thing to do is join the emcoV10lathe OR EmcoSuper11lathes OR Unimat OR Other user groups at groups followed by a dot and then io (originally on yahoo). You request to join the group. If accepted, you will have access to a wealth of downloadable information and can post questions. They cover all questions and discussions pertaining to ALL the above lathes and mills. This is by far the largest group of Emco lathe owners in the world. ANY question pertaining to parts INTERCHANGEABILITY between different models or brands unless stated in the listing. ANY engineering inquiry regarding SIZE, WEIGHT, LENGTH & DIAMETER. Please join a user group and post your questions to the group (as noted above). I get more than 1000 parts requests each year……. I don’t have any software for keeping track of these requests. I can be found at Emco Hobby Shoppe if you have something to sell. With my older inventory, if I’m motivated, I lower the prices gradually over time. In general, I respond unfavorably to low ball offers and especially so, when “Make An Offer” is not part of the listing. I typically have quite a stack of sales to process.

Applications: Milling Machine, Lathe, EDM, Grinder. Relative humidity: Less than 90%. Readout input signal: TTL square wave. Input signal frequency: Less than 5M Hz. 5µm (0.005mm/0.0002). Min resolution of DRO angle :0.0001/pulse. DRO Dimensions: 11.6″X6.7″X2.56. Linear Scale Interface: DB9(RS232). SDM 200 sets memory, power-off memory for 10years, circumference drilling, oblique line drilling, 1/2 centering. The simple R function. Chambering (applicable to: Milling machine, Boring machine). Tool conpensation (for lathe). Machining of oblique plane. Package Included : 1pc 3Axis DRO Digital Readout 3pc Linear Scale 450+500+1000MM (18″ + 20″ + 40) 1set Installation Accessories 1pc User Manual. FAQ: Q1 : are the length 100mm, 150mm, 200mm…. Answer : all are travel length , total length = Travel Length +140mm Q3 : if i need a scale like 255mm , can you offer it? Answer : Please contact ToAuto to get the video. Q5: Do you have Installation Manual? Answer : Yes, Please contact the customer service to get the video.

Item specifics Condition New: A -new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Low price declare and discreect package. Please make sure your address is correct. South Asia / Middle East Normally, 10-25working days, but sometimes it takes up to 40 days due to the Custom Inspection. Please make sure the postal address is correct, we will not be liable for postal lost caused by incorrect & invalid address provided. OUR GOAL IS 100% SATISFACTION FROM EACH AND EVERY CUSTOMER. If you are satisfied with the items you ordered, please leave feedback. We can work together to resolve any dispute.

TC Series coolant pump is single stage and developed for spraying of cooling lubricants and the circulation system, especially for machine tools. It is suitable to driver liquids such as water, coolant, light oil and other clean, non-aggressive matters liquid to cooling or lubricant applications. TC Series can be used in machine tools to perform Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. Professional design to perform solid entire unit and high stability. Whole models with efficient filterable strainer. Well design to dissipate operation thermal. Product and design with utility patents. CE & IP54. Patented design to avoid liquid over flooding. Brand: YU HSENG. Phase & Voltage (Low/High Volt) : 1? 110 / 220 V, 1? 120 / 240 V, 3? 220 / 440 V, 3? 240 / 480 V. (Technician default wiring in High Volt). Discharge Bore: NPT 3/8. NPT 1/2″; PT(BSPT) 3/8″; PT(BSPT) 1/2. Length (flange to bottom): 100mm (4). Flow rate in 60 Hz. 1? , 3/8 : 9.2 GPM (35 L/min). 3? , 3/8 : 9.8 GPM (37 L/min). 1? , 1/2 : 10.6 GPM (40 L/min). 3? , 1/2 : 11 GPM (42 L/min). Lift (Head Height) in 60 Hz. 1? , 3/8 : 5.4 M. 3? , 3/8 : 6.0 M. 1? , 1/2 : 5.2 M. 3? , 1/2 : 5.7 M. Pressure in 60 Hz. 1? , 3/8 : 7.7 PSI. 3? , 3/8 : 8.5 PSI. 1? , 1/2 : 7.4 PSI. 3? , 1/2 : 8.1 PSI. Made in Taiwan (Factory Location).

Pay attention to the selection of product specifications If you need other specifications, please contact customer service first.

Relative humidity: Less than 90%. Readout input signal: TTL square wave. Input signal frequency: Less than 5M Hz. 5µm (0.005mm/0.0002). Min resolution of DRO angle :0.0001/pulse. DRO Dimensions: 11.6″X6.7″X2.56. Linear Scale Interface: DB9(RS232). SDM 200 sets memory, power-off memory for 10years, circumference drilling, oblique line drilling, 1/2 centering. The simple R function. Chambering (applicable to: Milling machine, Boring machine). Tool conpensation (for lathe). Machining of oblique plane. 1pc DRO Or 1set Linear Scales(The size you can choose) 1Set Installation Accessories. 2AXIS DRO LCD SCREEN. 3AXIS DRO LCD SCREEN. FAQ: Q1 : are the length 100, 150, 200…. Q2: if i need 250mm , 1000mm scales with 2axis digital readout, how should i do? Answer : Please contact to get the video. (press 6 times after DRO powers on). Q5: Do you have Installation Manual? Answer : Yes, Please contact the customer service to get the video. (The file is too large to upload here). Q6 : Do you have any other kits that not listed, such as 100+250+300mm? 5? M(0.0002) DRO must be set to completely match the linear scale accuracy. Circumference holes processing, linear holes processing, ARC processing. Oblique processing, slope processing. Chamber processing, R function, the tool diameter compensation function, digital. Pin 1 to 4 connects +5V, 0V, A, B. Pin 5-9 is blank. DOUBLE SEAL & SIGNAL ABLE. Signal cable uses multilayer shielded wire steel and metal shell to provide extra protection. Deafult offer 3meters (9.84feet long) cable connecting with linear scale. Sensor adopts the precision metrology grating as the measurement standard. And the sliding parts have excellent repeatable positioning performance. Full set of installation accessories (L type cover, backplate and screws) included inside the linear scale, each scale equipped with some extra screws to avoid unsccessful installation.

545mm Milling Machine R8 Spindle + Bearings Assembly. After the spindle is replaced, the old machine, such as the new machine effect, changes due to the long-term wear of the spindle, the bearing clearance is large, and the tool jumps, resulting in the surface and side of the milling workpiece is not smooth, rough and uneven. Name: Milling R8 spindle+bearings. Length:545mm(Suitable for most milling machines). Packing quantity: 1set(R8 spindle+bearings). You can make order with no worry. Any concern just feel free to let us know, we’ll reply in 24 hours in normal condition. Orders are processed from Monday-Friday. Not on the weekends & public holidays. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.