4PCS stepper motor drivers DQ542MA 4.2A 50VDC 125Microsteps. 2PCS power supply 350W 36V. 3.0Nm(425oz. In). Stepper Motor Driver DQ542MA. DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DQ542MA runs under high speed, is also significantly higher than the other two-phase driver, what’s more. The positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine. CNC machine, Computer embroider machine, packing machines and so on. High performance, low price. Average current control, 2-phase sinusoidal output current drive. Supply voltage from 18VDC to 50VDC. Overvoltage, under voltage, overcurrent, phase short circuit protection. 15 channels subdivision and automatic idle-current reduction. 8 channels output phase current setting. Offline command input terminal. Motor torque is related to speed, but not related to step/revolution. High holding torque under high speed. Not condensation, no water droplets. Prohibition of combustible gases and conductive dust. POWER SUPPLY 350W 36V. 350W Single Output Switching Power Supply. AC input range selected by switch. Protections:short circuit/overload/over voltage/over temperature. 100% full load burn-in test. Low cost, high reliability. AC input voltage range: 90. AC inrush current: cold start 25A/115V, 50A/230V. DC adjustment range:±10% rated output voltage. 135%, hiccup mode, auto recovery. Setup, rise, hold up time: 200ms, 50ms, 20ms/230VAC at full load. Working temperature and humidity:-10? Set pins according to software as follows. Output pin: P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17. P2 – X axis Pulse, P3 – X axis Direction. P4 – Y axis Pulse, P5 – Y axis Direction. P6 – Z axis Pulse, P7 – Z axis Direction. P8 – A axis Pulse, P9 – A axis Direction. P14 – B axis Pulse, P1- B axis Direction. P16 – C axis Pulse, P17- C axis Direction. Input pin: P10, P11, P12, P13, P15. Set them for Emergency Stop and X Y Z Limit switch.

Application:Mainly used in CNC machine tool industry, automated production line and other high-precision positioning transmission industry.

XYZ three-axis actual stroke :300x180x60mm. Aluminum Table Size: 300x180mm. Stepper motor: Apply to Nema17/23 42/57BYG Stepper motor. Screw: T8 anti-backlash nut, lead 4mm. Spindle hole diameter: 52mm. Effect Laser Power: 40W. Facula Form: Punctiform, Fixed Focus. Input Voltage: 12V 5A. Interface Parameter: Support TTL signal controls power. Effect output power: 80W. Material: aluminum alloy + plastic. Spot form: Punctiform, fixed focus. Input port: XH2.54-3P socket. Interface parameters: support TTL signal control power. Laser module net weight: 300g. This kit is disassemble, needs the customer DIY assembling, needs certain electronic and the Mechanical Foundation. 500W power supply 1pc. 3 axis controller 1pc. ER11 chuck 8mm 1pc. Collect 3.175mm 1pc. Gift:6 limit switch + 1 Emergency stop switch + 1 Tool setter. 300W power supply 1pc.

Please watch the video from the link below. The easiest way to make your own CNC PLASMA CUTTER. Design to fit 2″x2″ and 50mmx50mm square tube profile. Kit includes, 3 slider cars, 1 torch holder, 2 plaques, bolts, screws that needed. Has the floating head feature. Aser cutted 5mm steel frame. Bended by computer guided bending machineNo weak welds! Full assembled with 6 point ball bearings for each sliding car. Zinc (galvanized) coated, water resistand. Can be drive by belt or rack&pinion. Stepper motors, belts, gears, switch, cable carrier are not includes! PACKAGE CONTENTS: (all parts shown at 6′th photo). 1x torch holder(z axis). 2x x-axis mounting plates. 1x Long screw and coupling for torch holder. All the bolts and nuts to setup the slider cars. You can ask any questions. WHAT ELSE I NEED FOR TO BUILD MY CNC PLASMA CUTTER? To build your Cnc plasma you will need. Nema 23 type Stepper motors capable of min. Stepper drivers which matches stepper motor needs. Pc and a suitable software (usb or parallel port) which fits your needs. Interface board to connect stepper drivers and pc. Power supply capable to feed the drivers. 2″x 2″ (50x50mm) tubings. 2 pcs of tubing 25cm longer than your work piece length. 3 pcs of tubing 25 cm longer than your workpiece width. 5mm pitch x12mm width belt and 12-18 tooth pulley. Rack (15x15mm+-2mm) and 12 to 18 tooth pinion. Some time, cutting and wiring works. Check out other items! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “k-koray” and is located in this country: TR. This item can be shipped worldwide.

• Control: CNC
• Model: 23

Sherline 5400 Mini Deluxe Mill Milling Machine Bench Top w/ Stepper Motors. This listing is for a Sherline Table Top Milling Machine. Model: 5400 Specifications: Brand: Sherline Type: Mini Milling Machine Condition: Used RPM: 70 to 2800 RPM Travel: 8.65″ (X), 5.00″ (Z), 6.25″ (Y) Max Clearance (Table to spindle): 8″ Spindle Nose Taper: #1 Morse Table: 2.75″ x 13″ Electric: 115V, Single Phase Weight: 36.5 LBS Includes all accessories as pictured including milling vice. The unit has 3 stepper motors installed on each axis. It does not include the unit that these 3 motors plug into and that will need to be sourced separately. Main spindle tested and runs great. Please inspect picture carefully as only what’s pictured is included with the mill. Get images that make Supersized seem small. Showcase your items with Auctiva’s. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in this country: US. This item can be shipped worldwide.

• Brand: Sherline
• Country/Region of Manufacture: United States
• Function: Milling
• MPN: 5400
• Machine Type: Mini Milling Machine
• Max Spindle Speed (RPM): 2501 – 3000
• Model: 5400
• Power Source: Electric
• Table Length: 10 in – 14.9 in
• Table Width: Less than 10 in
• Voltage: 110 V
• X-Axis Travel Bed: Less than 10 in
• Y-Axis Travel Bed: Less than 10 in
• Z-Axis Travel Bed: Less than 10 in

Rotary Axis T Chuck Type. CNC 5 axis (A aixs, Rotary axis) T chuck type for cnc router cnc milling machine, best quality. 1: Dimensions 200 250 180. 2: A axis (fourth axis), 57 78 thick 4 wire stepper motor 3.5A current ratio of 1: 8. 3: B-axis (fifth axis), 57 stepper motor 3.5A current, coupling direct-attached. 4: Stainless steel dust cover. 5: Total weight 9.5KG. 6: Load-bearing workpiece 10KG. 7: Appearance anodized rust treatment. 8: 4-core aviation connector 1 = A +, 2 = A-, 3 = B +, 4 = B. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dembergear1″ and is located in this country: CN. This item can be shipped to United States, Canada, Australia.

• Color: T Type
• Ships From: China
• Model: DIY CNC 5th Fifth 5Axis A
• Modified Item: No
• Spindle Horsepower: Less than 1 hp
• Country/Region of Manufacture: China
• Custom Bundle: No
• Machine Type: Milling Machine
• Table Length: DIY CNC Fifth 5Axis
• Max Spindle Speed (RPM): DIY CNC Fifth 5Axis
• Model Year: 2020
• Power Source: Electric
• X-Axis Travel Bed: DIY CNC Fifth 5Axis
• Y-Axis Travel Bed: DIY CNC Fifth 5Axis
• Z-Axis Travel Bed: DIY CNC Fifth 5Axis
• MPN: 6407660983
• Spindle Taper: CAT 50
• Feature 5: 5axis
• Function: Milling
• Feature 6: 5 aixs
• Feature 7: A axis
• Feature 8: Cnc axis
• Number of Jaws: 4
• Origin: CN(Origin)
• Power: Electric
• Brand: Unbranded
• Certification: CE
• Feature 1: 5th axis
• Feature 2: Fifth axis
• Feature 3: B aixs
• Table Width: DIY CNC Fifth 5Axis
• Feature 4: DIY CNC Rotary axis
• Control: CNC
• Voltage: 220 V

Taig MicroMill 4-axis CNC with Stepper Motors and PC Controller. 4 stepper motors (already installed). Mach 3 (already installed). Mach 3 PDF CD. ACAD video tutorials CD. BobCAD Mach 3 CD. (2) Operations Discs for CNC. And everything shown in pictures. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dji-5622″ and is located in this country: US. This item can be shipped to United States.

• Brand: Taig
• Spindle Horsepower: Less than 1 hp
• Function: Milling
• Control: CNC
• Model Year: 2021
• Machine Type: Mini Milling Machine
• Voltage: 120 V
• Model: CNC
• Spindle Taper: ER 16

Mini cnc metal milling machine. Mini CNC Milling Machine with 750w Brushless Motor Extra Wide Cross Table. This machine uses a stand alone controller and ready to use out the box, simply plug your usb g code. C7 ballscrews x-y-z axis. Working area y axis = 5.1 x axis = 11 z axis = 10. Nema 23 2.8nm closed loop steppers (never loose steps). Stand alone cnc controller mach3 computer. I will include general wrenches for tool changes Please note that the machine is a stand alone controller you only need your g code in a usb. Machine is ready to run out the box! If you have any questions please feel free to contact me. Or make any offers. MINI CNC VERTICAL MILLING MACHINE. The item “Mach3 Bench Top CNC MILLING MACHINE metal milling machine closed loop stepper” is in sale since Wednesday, October 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “crlalas88″ and is located in Mountain View, California. This item can be shipped to United States.

• Spindle Horsepower: 1 hp
• Machine Type: CNC Milling Machine
• Spindle Taper: R8
• Z-Axis Travel Bed: 11
• Brand: AXYZ MACHINES
• X-Axis Travel Bed: 10
• Function: CNC MILLING DRILLING
• Control: CNC
• Max Spindle Speed (RPM): 6000
• Voltage: 110 V
• Model: MX3
• Y-Axis Travel Bed: 5.1
• Country/Region of Manufacture: United States

4PCS stepper motor drivers DQ542MA 4.2A 50VDC 125Microsteps. 2PCS power supply 350W 36V. 3.0Nm(425oz. In). Stepper Motor Driver DQ542MA. DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DQ542MA runs under high speed, is also significantly higher than the other two-phase driver, whats more. The positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine. CNC machine, Computer embroider machine, packing machines and so on. High performance, low price. Average current control, 2-phase sinusoidal output current drive. Supply voltage from 18VDC to 50VDC. Overvoltage, under voltage, overcurrent, phase short circuit protection. 15 channels subdivision and automatic idle-current reduction. 8 channels output phase current setting. Offline command input terminal. Motor torque is related to speed, but not related to step/revolution. High holding torque under high speed. Not condensation, no water droplets. Prohibition of combustible gases and conductive dust. POWER SUPPLY 350W 36V. 350W Single Output Switching Power Supply. AC input range selected by switch. Protections:short circuit/overload/over voltage/over temperature. 100% full load burn-in test. Low cost, high reliability. AC input voltage range: 90. AC inrush current: cold start 25A/115V, 50A/230V. DC adjustment range:±10% rated output voltage. 135%, hiccup mode, auto recovery. Setup, rise, hold up time: 200ms, 50ms, 20ms/230VAC at full load. Working temperature and humidity:-10. Set pins according to software as follows. Output pin: P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17. P2 X axis Pulse, P3 X axis Direction. P4 Y axis Pulse, P5 – Y axis Direction. P6 Z axis Pulse, P7 Z axis Direction. P8 – A axis Pulse, P9 – A axis Direction. P14 – B axis Pulse, P1- B axis Direction. P16 – C axis Pulse, P17- C axis Direction. Input pin: P10 , P11, P12, P13, P15. Set them for Emergency Stop and X Y Z Limit switch. The item “US Nema23 stepper motor 435oz+driver DQ542MA 18-50V+Power supply350w 36v” is in sale since Monday, July 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncmotor111″ and is located in Rowland Heights, California. This item can be shipped worldwide.

• Machine Type: Milling Machine
• Power Source: Electric
• MPN: Does Not Apply
• Function: Drilling
• Brand: wantai
• Control: Automatic
• Voltage: 36v/48VDC

Taig MicroMill CNC with Stepper Motors and PC Controller. I built this as a project mainly because I wanted to experament with CNC control. Now that I have checked that off the list it is time for this mill and control to move on to someone else who will use it. Metric ball screws 2.5mm pitch. Travel in X axis 12 in. Travel in Y axis 5.5 in. Travel in Z axis 6.0 in. Table dimensions 3 1/2 x 18.4 inches. Maximum Z-distance to table 9.0 in. Z-Axis swivel 90 degrees. Z axis column rotation up to 180 degrees. Spindle head rotation 90 degrees. Spindle has less that. StepperOnline 1.2Nm Stepper Motors with Encoders. CL57T Stepper Driver with Encoder positioning Feedback. Mesa 7I96 Ethernet GPIO Step and Direction generation board. 36V Power supply for stepper driver. 5V Power Supply for Mesa 7I96. 20ft sheilded twised pair cable (not featured in pics but included). Everything inside of LinuxCNC is setup and working relating to the machine control. I did a few engravings; featured in the pictures above is a photo of the machine running the default LinuxCNC lettering routine. As far as getting up and running, everything is plug and play right now. Asus F2A85-M MicroATX motherboard with FM2 Socket. AMD A10-5800K Quad Core 3.8 GHz. Nvidia Quadro K600 Graphics card (helps tons with latency). 500 GB Western Digital Blue SSD. The PC was an old gaming computer that I was not using anymore, hence the overkill amount of RAM. Latency of LinuxCNC on this PC has never gotten over 12,000 while running LinuxCNC machine control and the highest I have ever seen it was 30,000 with 15 GLXGears running and several web browsers going all at once. This system is complete and configured all ready to go for you to use. I packaged it up in full working order and all you need to do is plug everything in and launch LinuxCNC. The item “Taig MicroMill CNC with Stepper Motors and PC Controller” is in sale since Tuesday, August 31, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “deltron540″ and is located in Warrenton, Virginia. This item can be shipped to United States.

• Model: CNC
• Brand: Taig
• Spindle Horsepower: Less than 1 hp
• Function: Milling
• Control: CNC
• Model Year: 2021
• Machine Type: Mini Milling Machine
• Voltage: 120 V
• Spindle Taper: ER 16