We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 10mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in this country: US. This item can be shipped to United States.

• Brand: Case
• Function: Milling
• Model: Metric Tram Tool 75-150mm

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? With a brushed finish. Shank hardened dowel pin with a 18-8 stainless set screw to retain. Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in this country: US. This item can be shipped to United States.

• Brand: Case
• Function: Milling
• Model: Tram 3-6\

We are out of the office from 10/7/21 until 10/13/21. We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 10mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to. Tram in a Wells Index Mill. Randy Richard did a demonstration on. Tramming in a BridgePort clone using a different common reference. Crowd Sourced written instructions. Aaron Engineering did a nice unboxing video and first hand review. Mark Presling gives a first impression and discussion of his use. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We love your feedback. It helps us make better quality products. The item “Metric Adjustable Spindle Square Mill Router Tram Tool 75-150mm Case+Indicators” is in sale since Wednesday, April 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in Boring, Oregon. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Model: Metric Tram Tool 75-150mm
• Function: Milling
• Brand: Case

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech. Square the head of a milling machine quickly and easilySimply lower unit to the table and adjust the head until both indicators read the sameSized perfectly to fit the bed of a 6″ vise allowing the head to be trammed to the vise instead of the tableCan be used with a sine bar or sine plate to adjust the head to precise anglesCalibration procedure accounts for any error introduced by worn colletsGuaranteed to be equal to or better than any other tramming method or spindle squaring device availableLarge 2.2″ easy to read indicator faceBody made from red anodized aluminiumIncludes calibration gauge and padded caseThe Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vise allowing you to tram the head to the vise instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Key SpecificationsShank Size – 1/2 inch. Graduation – 0.0005inch. Gauge repeatability – 0.0002 inch. Between Centres – 5 inch. Edge Technology Pro Tramming Gauge for accurately setting milling head square. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Square the head of a milling machine quickly and easily. Simply lower unit to the table and adjust the head until both indicators read the same. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Large 2.2 easy to read indicator face. Body made from red anodized aluminium. Includes calibration gauge and padded case. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Shank Size – 1/2 inch. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech” is in sale since Tuesday, August 7, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 09-000
• Manufacturer Part Number: 09-000
• Part Number: ME-ED-09-000
• Type: Tramming
• Weight (Grams): 950.000000

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech. Square the head of a milling machine quickly and easilySimply lower unit to the table and adjust the head until both indicators read the sameSized perfectly to fit the bed of a 6″ vise allowing the head to be trammed to the vise instead of the tableCan be used with a sine bar or sine plate to adjust the head to precise anglesCalibration procedure accounts for any error introduced by worn colletsGuaranteed to be equal to or better than any other tramming method or spindle squaring device availableLarge 2.2″ easy to read indicator faceBody made from red anodized aluminiumIncludes calibration gauge and padded caseShank Size – 1/2 inchThe Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vice allowing you to tram the head to the vice instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Key SpecificationsGraduation – 0.001inchGauge repeatability – 0.0002 inchBetween Centres – 5 inch. Edge Technology Pro Tramming Gauge for accurately setting milling head square. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Square the head of a milling machine quickly and easily. Simply lower unit to the table and adjust the head until both indicators read the same. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Large 2.2 easy to read indicator face. Body made from red anodized aluminium. Includes calibration gauge and padded case. Shank Size – 1/2 inch. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Graduation – 0.001inch. Gauge repeatability – 0.0002 inch. Between Centres – 5 inch. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech” is in sale since Monday, July 30, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 01-000
• Manufacturer Part Number: 01-000
• Part Number: ME-ED-01-000
• Type: Tramming

Mini Pro Tram Bridgeport Head Square Mill Spindle CNC Router Milling Edge Tech. Ask Question SAME DAY DISPATCH Same day despatch on all items ordered before 15:00 GMT Product Features Square the head of a milling machine quickly and easily Simply lower unit to the table and adjust the head until both indicators read the same Can be used with a sine bar or sine plate to adjust the head to precise angles Calibration procedure accounts for any error introduced by worn collets Guaranteed to be equal to or better than any other tramming method or spindle squaring device available Body made from red anodized aluminium Includes calibration gauge and padded case Description The Mini Pro Tram by Edge Technology has all the same great features of the full size Pro Tram but in a smaller package. The unit is perfectly sized for bench-top and mini-mill machines. The Mini Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vise allowing you to tram the head to the vise instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Key Specifications Shank Size – 1/4 inch. Graduation – 0.001inch. Gauge repeatability – 0.0002 inch. Between Centres – 3 inch. About us Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. Edge Technology Mini Pro Tramming Gauge for accurately setting milling head square. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Square the head of a milling machine quickly and easily. Simply lower unit to the table and adjust the head until both indicators read the same. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Body made from red anodized aluminium. Includes calibration gauge and padded case. The Mini Pro Tram by Edge Technology has all the same great features of the full size Pro Tram but in a smaller package. Shank Size – 1/4 inch. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. The item “Mini Pro Tram Bridgeport Head Square Mill Spindle CNC Router Milling Edge Tech” is in sale since Thursday, February 9, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

• Brand: Edge Technology
• Display: Dial
• MPN: 11-000
• Manufacturer Part Number: 11-000
• Part Number: ME-ED-11-000
• Sub-Type: Mill Head Alignment
• Type: Tramming
• Weight: 590.0000